Locations of Parts and Controls

Audio Out (3.5mm)- Connect an external speaker or headphones.
HDMI Video Input - Connect an HDMI cable to a device that supports HDMI video output.
USB Power Output – Connect a USB power cable to provide power to a HDMI streaming stick or to charge a smartphone battery. Cannot be used for video input.
Power Indicator Light – Indicator light will illuminate red when charging and illuminate green once fully charged.
Micro USB Charging Port – Connect the supplied Micro USB to USB charging cable to a USB wall outlet or USB port on a computer to charge the projector’s internal battery. Fully charge battery before the first use (approx. 3-4 hours).
Projector Lens
Focus Wheel – Roll the focus wheel forward and backwards to fine-tune the projected image.
Volume Controls – Increase (+) or decrease (-) the volume output of the projector.
System Indicator Light – Indicator light will illuminate blue when the projector is starting up.
Power Switch – Connect the supplied Micro USB to USB charging cable to a USB wall outlet or USB port on a computer to charge the projector’s internal battery. Fully charge battery before the first use (approx. 3-4 hours).
Reset Button – Press to reset projector.
Rubber Foot Pads - Provides stability and proper airflow to cooling vents.
Tripod Mount - Will fit a standard sized tripod screw. Tripod not included.
Cooling Vent - IMPORTANT: Do not cover or block airflow to the vent.

How to Connect

Connect Your Apple Products

To connect your Apple device to a Miroir projector, you will need an Apple Digital AV Adapter (sold separately) and an HDMI cable (included in the box).

To connect your Macbook you will need an Apple USB-C Digital AV Multiport Adapter (sold separately) and an HDMI cable (included in the box).

Connect Your Android Device

Android devices support a variety of connectivity standards. Here are a few examples of how you would connect:

Source Device	Cable/Adapter Required
Android Devices that support USB-C Video out	USB-C to HDMI Adapter (sold separately) and HDMI Cable (included in the box)
Android devices with SlimPort	Slimport to H(sold separately) and HDMI Cable (included in the box)
Android devices with MHL	MHL to HDMI Adapter (sold separately) and HDMI cable (included in the box)

Note: You may need to check with your device manufacturer to verify that your Android device supports video out.

To connect your Samsung S8 or later device with USB-C you will need a Samsung USB-C to HDMI adapter (sold separately) and an HDMI cable (included in the box).

Connect Your HDMI Connected Devices: Laptops, Streaming Devices, Streaming Sticks

To connect your HDMI connected laptop or streaming box, you will need an HDMI cable (included in the box).

To connect your HDMI streaming stick, simply plug it directly into your Miroir projector's HDMI port.

Note: Some streaming sticks require their own power. The USB power cable for those devices can
be plugged into the USB port on the projector or a USB wall outlet.

For information on connecting other common source devices, see the What do I need to connect? help article.

Troubleshooting

The image is blurry

Adjust the projected image’s focus by rolling the focus wheel forwards or backwards.
Check that the surface you are projecting on is smooth and non-reflective.
Check that the projector’s lens is clean and free of debris.

Still having trouble? More troubleshooting information available in the The projected image is blurry help article.

The image is not square

Check that the projector’s lens is parallel to your projection surface and that your projection surface is flat.

No sound

Check the volume control on the projector to ensure the volume is turned up.
Check the volume control on your source device to ensure the volume is turned up.
Check that the HDMI cable is fully plugged into the HDMI port.
If you are using an adapter, verify that the adapter supports audio.

Projector will not power on, or stay powered on

If on battery power, try plugging the projector in with the Micro USB charging cable to a USB wall outlet or USB port on a computer.
If the projector is plugged into power with the Micro USB charging cable, check that the cable is securely plugged into both the USB power source and the Micro USB port on the projector. Note: If you have the projector plugged into a computer’s USB
port, you may need to check your computer’s power settings to
ensure that the USB ports continue to provide power when the
computer is in sleep mode or power saver mode.
Check that the power indicator light is illuminating to red when the projector is plugged into power. If the light is not illuminating, try a difference Micro USB charging cable and a different USB power source.

Still having trouble? More troubleshooting information for power or battery issues available in the Unexpected Power Offs and Troubleshooting Power Issues help article.

No signal message

If on battery power, try plugging the projector into power with the micro USB charging cable.
Check that you are connecting using the HDMI port on the projector. The projector requires HDMI input to project. Note: The Micro USB port on the projector is only used to charge the projector’s internal battery and the USB port on the projector is used only to provide power out.
Check that the HDMI cable is firmly plugged into the projector and your source device.
If you are using an adapter to connect your source device, check with your source device’s documentation or manufacturer to ensure you are using the proper adapter for an HDMI video out connection.
If you are connecting to a computer, check the display settings on your computer to ensure you have a multiple display option selected (such as “duplicate these displays”).

Still having trouble? More troubleshooting information for the "No Signal" error message is available in the "No Signal" or No Image from the Projector help article.

★ Micro Projector (M29 and M75)